HVAC
Every maintenance visit checked before the van leaves
Technicians send photos of filters, gauges and nameplates from the job. Your AI agent reads the values and compares them with every past visit. When something looks off, it checks with the right person in your office while the technician is still on site.
- FilterReplaced, new filter in the photo
- Supply air13.4 °C, read from the display
- Suction pressure3.1 bar. 3.9 bar in March, 3.6 bar in July
- Service valveOil stain visible in photo 4
Could be a slow refrigerant leak. Asked service lead Maria Klein whether Ali Yilmaz should run a leak check before he leaves.
What changes when your AI agent does the checking
- BeforeWith your AI agent
- Readings are written on paper and typed in later, if at all.The technician photographs the gauge. Your AI agent reads the value.
- Nobody compares today's reading with last spring's.Your AI agent compares every reading with every past visit of the same unit.
- A forgotten check means a second drive out.Your AI agent notices the gap while the technician is still on the roof.
- The customer gets a report a week later.The report is drafted the same day and waits for your OK.
A senior technician in every van
A new technician photographs the fault code. Your AI agent reads it, looks it up in the manual you gave it and sends the next step. Your senior people stop answering the phone all day.
What you tell your AI agent
When a technician sends a fault code, look it up in the manual I gave you for that model and send the next step. Ask for a photo after each step.
- Task13:05completedFault call: rooftop unit 2
The unit is reported off.
PhotoController display and nameplateDisplay and nameplate - Subtask13:12completedCheck the drain pan
The display shows the condensate float switch has tripped. For this model the manual says to check the drain pan and the trap first.
PhotoPhoto of the drain panDrain pan, full of water - Subtask13:20completedClear the drain and restart
The drain line is blocked. Clear the trap, empty the pan and restart the unit.
ChoiceUnit running again?PhotoDisplay after restartDisplay, no fault
A checklist that fits the unit in front of you
Your AI agent builds each visit's checklist from the unit's manual and its history. A unit that had a blocked drain in May gets a drain photo in June. A new unit gets the short list.
What you tell your AI agent
Before each visit, write the checklist for that unit from its manual and its past visits. Ask for a photo wherever something went wrong before.
- Leak check with the detectorPressure lower on each of the last 3 visits
- Photo of the condensate drainBlocked in May
- Photo of the filter before and afterEvery visit
- Photo of the suction pressure gaugeEvery visit
The whole history of every unit, one question away
Every photo and reading is kept with the unit, the technician and the date. Your AI agent sees slow changes that nobody would spot visit by visit.
Suction pressure was 3.9 bar in March, 3.6 bar in July and 3.1 bar today, with no repair in between. Today's photo also shows an oil stain at the service valve.
That fits a slow refrigerant leak. Ali Yilmaz is running a leak check now.
Should I add a leak check to the next visit of the two other units of the same model?
What Simplepush does on its own
Simplepush has no AI of its own. This part works from the first day, with or without an AI agent.
- Sends each task to a person's phone, with a deadline if you set one
- Shows who answered, who declined and why
- Keeps every answer, photo, voice note and file with who sent it, when and where
- Lets your team search it in the dashboard, and your AI agent read it through the connector
Who runs the checks and schedules?
Your own AI agent, in its own subscription, which is not included in the Simplepush price. A check at 15:00 or a report at 18:00 is a scheduled run in your agent, which sends and reads through Simplepush.
Simplepush does not send on a schedule by itself, so your agent needs to support scheduled runs.
Your AI agent checks. You decide.
Your AI agent
- Reads values from gauge and display photos
- Compares each visit with the unit's history
- Drafts the customer report
You
- Decide on repairs and offers
- Approve what goes to the customer
- Give your AI agent the manuals and service plans
Copy this into your AI agent
Check every visit the same day
Every hour, look at the maintenance visits that came in. Read the values from the gauge and display photos and compare them with the earlier visits of the same unit. If a value is outside the range in the manual or keeps getting worse, ask the technician for a second reading and tell me.
Paste it into your AI agent with the Simplepush connector set up. How to connect your AI agent
What HVAC teams use it for
Preventive maintenance
Due visits sent out, every reading checked against the history.
Fault calls
Fault code read from the display, next step from the manual.
Leak checks
Pressure trends spotted across visits, leak checks asked for in time.
Asset list
Every nameplate photo becomes a line: make, model, serial number, refrigerant.
Visit briefing
Before each visit the technician gets the unit's history and the parts to bring.
Customer reports
Drafted from the visit, with photos and readings, the same day.
See it with your own crew
Book a 30-minute demo and we walk you through Simplepush with your own sites in mind.